Installed on the wall or on a rolling shutter casing, the EHT humidity sensitive air inlet is the ideal choice for air admission through the wall, and thus provides an alternative where lack of available space (on window frames) prevents the installation of window mounted air inlets.
The stylish design of the EHA² air inlet enables perfect integration on most windows or rolling shutter casings. With the inclusion of high efficiency acoustic foam the product reaches an acoustic attenuation of up to 42 dB when mounted with the special base and canopy. An optional device allows on demand manually closing or opening of the air inlet, complementing the humidity sensitive function available on the EHA².
The TDA exhaust units directly adjust the extracted airflow to the level of human presence detected in the room. The airflow level in “presence” mode can be adjusted at every moment according to the usual number of occupants in the room (1 to 4 persons per vent).
By adjusting the airflow to the ambient relative humidity rate, the GHN humidity sensitive exhaust unit is the perfect solution for the natural ventilation of wet rooms. Directly replacing the old exhaust unit without modification of the hole, it fits perfectly into the environment of bathroom, toilets and kitchen. Its robust and reliable humidity sensitive sensor ensures optimum performance at all the times, with remarkable longevity.
The BXC2 exhaust unit incorporates all the functions one could request from an air exhaust unit. With various activation modes such as humidity, presence, CO2 and VOC for example, the BXC2 exhaust unit automaticaly adjusts the level of ventilation according to occupants’ needs in all situations, all rooms.
Specially adapted to work at low pressure, the GBP humidity sensitive exhaust unit is an ideal solution for the renovation of ventilation ductworks initially operating in natural ventilation. The GBP exhaust unit is available in several versions activated by a humidity sensitive sensor or by a pull cord, for implementation on shunt or individual air ducts.
The V5S fan can ventilate a complete dwelling: the 6 available side inlets can be connected to several exhaust units in the wet rooms. With its constant pressure, the fan is well suited to demand controlled exhaust units.
Thanks to its slim styling and silent running, the VAM fan is ideal for installation in living spaces. With its powerful AC motor and its optimised design, the VAM can be connected to up to six exhaust units in the same dwelling.
Installed at the top of the ventilation ducts, the VBP hybrid fan enables to guarantee satisfactory airflow all year long on a former natural ventilation. By creating a complementary pressure when the additional natural draught is not sufficient as it may sometimes be the case in mid-season and summer, the VBP hybrid fan optimizes the working of natural ventilation, while keeping its dimensions (ventilation exhaust units and air ducts).
The VBP+ hybrid ventilation fan range is the ideal solution for the renovation of buildings equipped with natural or passive stack ventilation ducts, improving the performance of the ventilation through a very low electrical consumption.
The V4A whole-house exhaust fan has been designed to ventilate a complete dwelling, with up to four exhaust units located in the kitchen, toilet(s) and in the bathroom(s). Easily hidden in a wall cupboard or in a ceiling void, the V4A whole-house exhaust fan will provide you all the comfort and air quality you can expect from a low consumption, silent exhaust fan.
The VTZ fans range offers five models with capacities going from 500 m3/h up to 7 000 m3/h for the equipment of collective dwellings, offices, schools or other buildings. The VTZ fans are designed for an outdoor installation, in terrace or on a pitched roof. Many connecting parts are available to adapt to different encountered cases. The VTZ fans are characterized by their solidity and by an excellent energy efficiency, thanks to the use of high-performance electronic commutation motors and to an integrated pressure control device.
The AWN Eco+ is a compact and fully integrated exhaust air heat pump. Here, the ventilation unit and the heat pump are combined in one. This components’ closeness allows a direct transmission of the exhaust air heat to the refrigerant which enhances the device efficiency and energy saving. The ventilation adapts the airflows according to the needs in the dwelling thanks to Aereco’s humidity-sensitive exhaust air system: the on-demand management is ensured at any time.
The heat provided throughout the year is then released by the heat pump directly to the heating water of the building heating system. The AWN Eco+ drastically reduces the energy load for heating water.
AWN Connect combines AWN Basic with Connect WP, a brine / saltwater / water heat pump designed specifically for AWN. While the AWN Basic is installed where the exhaust ducts end - above or under the roof - the Connect WP is designed for indoor installation and can be placed in the boiler room.
On the cold source side, the Connect WP cools a brine circuit up to 2 ° C and feeds the cold brine to the AWN Basic heat exchanger using an integrated feed pump. The heat is extracted from the stale air and returned to the heat pump. The heat pump raises the temperature level of the heat produced and makes it available the whole year through the heating water to the building's heating system.
One of the biggest challenges, that we are encountering today is the balance between comfort, security and the efficiency of energy. When it comes to occupants’ comfort in an indoor area, both residential as well as non-residential markets, the building constructors are providing a best in class experience for the occupants with well-equipped building automation solutions.
Nowadays, the buildings are nearly air-tight, entailing a risk of poor indoor air quality if there is a lack of ventilation. Indoor air quality can generally be assessed by measuring the concentration of carbon dioxide, known to be representative of indoor air conditions. Aereco introduces the new S-CO2/T Modbus, an effective CO2 sensor specially designed to accurately assess indoor CO2 concentrations, in order to help systems optimize indoor air quality.
Indoor environments contain various gases and microscopic particles that can impact human health. The S-VOC is designed to accurately and reliably determine the level of volatile organic compounds (VOC), typically associated with cigarette smoke, cooking smells, and other pollutants.
Most new buildings in developed countries are nearly air-tight, entailing a risk of poor indoor air quality if there is a lack of ventilation. Indoor air quality can generally be assessed by measuring the concentration of carbon dioxide, known to be representative of indoor air conditions.
The S-RH/T is designed for applications such as demand-controlled ventilation and air conditioning where accurate measurements, excellent long-term stability, and maintenance-free operation are absolute musts.
External air inlet canopies protect the elements of the frame (windows, casings) hosting the air passage holes against bad weather and water infiltration. Their role is also aesthetic: they blend in perfectly with the frontage and windows.
Not only does the AC external canopy protect the interior of the window from water infiltration and volatile insects, it also controls the airflow to avoid over-ventilation in case of excess of pressure through a patented device. This ability makes the AC canopy particularly suitable for tall buildings or windy locations. The AC external canopy can be installed with either fixed or humidity sensitive air inlets.